VEGA
X
Clear Filters

Categories:

Filters
View 10 25 50 Showing all 1 Results
Product successfully added to your cart. View Cart
  • ￩
    ￫
    VEGAVIB 61

    VEGAVIB 61

    JOD JOD650.00
    ype: Vibrating rod level switch
    Use: Minimum or maximum level detection in silos / tanks
    Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
    Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
    Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
    Process temperature: typically -50 to +150°C, optional up to +250°C
    Pressure: up to about 16 bar
    Material: usually 316L stainless steel
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    1 Left in Stock

    VEGAVIB 61

    JOD JOD650.00
    ype: Vibrating rod level switch
    Use: Minimum or maximum level detection in silos / tanks
    Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
    Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
    Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
    Process temperature: typically -50 to +150°C, optional up to +250°C
    Pressure: up to about 16 bar
    Material: usually 316L stainless steel
    ADD TO CART
    ype: Vibrating rod level switch
    Use: Minimum or maximum level detection in silos / tanks
    Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
    Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
    Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
    Process temperature: typically -50 to +150°C, optional up to +250°C
    Pressure: up to about 16 bar
    Material: usually 316L stainless steel

    VEGAVIB 61

    JOD JOD650.00
    ADD TO CART
    Successfully Added to your Shopping Cart
    Adding to Cart...

Related Posts

Macro-Structure

KL11

Main specs / meaning:

  • Type: Differential pressure transmitter
  • Brand: Nagano Keiki
  • Model: KL11
  • Medium: Gas / air
  • Sensor: Miniature silicone diaphragm
  • Output: Analog signal, depending full model code
  • Use: Measures small pressure difference between high side and low side
  • Applications: Filter clogging, airflow, clean room pressure, duct pressure, gas pressure monitoring
Macro-Structure

VEGAVIB 61

  • ype: Vibrating rod level switch
  • Use: Minimum or maximum level detection in silos / tanks
  • Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
  • Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
  • Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
  • Process temperature: typically -50 to +150°C, optional up to +250°C
  • Pressure: up to about 16 bar
  • Material: usually 316L stainless steel
  • Process fitting: thread from G 1½ A or 1½ NPT
  • Output options: relay DPDT, transistor NPN/PNP, NAMUR, two-wire options depending exact model code
  • Power supply: depends on electronics module; common relay version supports wide AC/DC supply options