VEGAVIB 61
Home / Shop
VEGAVIB 61
JOD JOD650.00
A one-time price of JOD JOD650.00 will be added to your order.
1 Left in Stock
ype: Vibrating rod level switch
Use: Minimum or maximum level detection in silos / tanks
Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
Process temperature: typically -50 to +150°C, optional up to +250°C
Pressure: up to about 16 bar
Material: usually 316L stainless steel
Use: Minimum or maximum level detection in silos / tanks
Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
Process temperature: typically -50 to +150°C, optional up to +250°C
Pressure: up to about 16 bar
Material: usually 316L stainless steel
Manufacturer: VEGA
- Description
- Specifications
- ype: Vibrating rod level switch
- Use: Minimum or maximum level detection in silos / tanks
- Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
- Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
- Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
- Process temperature: typically -50 to +150°C, optional up to +250°C
- Pressure: up to about 16 bar
- Material: usually 316L stainless steel
- Process fitting: thread from G 1½ A or 1½ NPT
- Output options: relay DPDT, transistor NPN/PNP, NAMUR, two-wire options depending exact model code
- Power supply: depends on electronics module; common relay version supports wide AC/DC supply options
- ype: Vibrating rod level switch
- Use: Minimum or maximum level detection in silos / tanks
- Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
- Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
- Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
- Process temperature: typically -50 to +150°C, optional up to +250°C
- Pressure: up to about 16 bar
- Material: usually 316L stainless steel
- Process fitting: thread from G 1½ A or 1½ NPT
- Output options: relay DPDT, transistor NPN/PNP, NAMUR, two-wire options depending exact model code
- Power supply: depends on electronics module; common relay version supports wide AC/DC supply options
Related Posts
KL11
Main specs / meaning:
- Type: Differential pressure transmitter
- Brand: Nagano Keiki
- Model: KL11
- Medium: Gas / air
- Sensor: Miniature silicone diaphragm
- Output: Analog signal, depending full model code
- Use: Measures small pressure difference between high side and low side
- Applications: Filter clogging, airflow, clean room pressure, duct pressure, gas pressure monitoring
EPCOS B85321-A2205-B201
Home / Shop
EPCOS B85321-A2205-B201
JOD JOD159.99
A one-time price of JOD JOD159.99 will be added to your order.
20 Left in Stock
EPCOS B85321-A2205-B201
TDK B85321A2205B201 200A feedthrough filter
TDK B85321A2205B201 200A feedthrough filter
Manufacturer: EPCOS
- Description
- Specifications
EPCOS B85321-A2205-B201
TDK B85321A2205B201 200A feedthrough filter
| Manufacturer | EPCOS / TDK |
| Series | B85321 |
| Type | Feedthrough EMI/RFI filter |
| Capacitance | likely 2 × 1 µF |
| Current rating | 200 A |
| Voltage rating | 250 VAC / 600 VDC class |
| Mounting | Metal body / screw mounting feedthrough |
| Use | EMI suppression on high-current DC or AC power lines |
Related Posts
KL11
Main specs / meaning:
- Type: Differential pressure transmitter
- Brand: Nagano Keiki
- Model: KL11
- Medium: Gas / air
- Sensor: Miniature silicone diaphragm
- Output: Analog signal, depending full model code
- Use: Measures small pressure difference between high side and low side
- Applications: Filter clogging, airflow, clean room pressure, duct pressure, gas pressure monitoring
VEGAVIB 61
- ype: Vibrating rod level switch
- Use: Minimum or maximum level detection in silos / tanks
- Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
- Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
- Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
- Process temperature: typically -50 to +150°C, optional up to +250°C
- Pressure: up to about 16 bar
- Material: usually 316L stainless steel
- Process fitting: thread from G 1½ A or 1½ NPT
- Output options: relay DPDT, transistor NPN/PNP, NAMUR, two-wire options depending exact model code
- Power supply: depends on electronics module; common relay version supports wide AC/DC supply options
RH-M-0150M-D70-S2G100
Home / Shop
RH-M-0150M-D70-S2G100
JOD JOD420.00
A one-time price of JOD JOD420.00 will be added to your order.
1 Left in Stock
Maximum purchase amount of 2 is allowed
| Code section | Meaning |
| -------------------- | ---------------------------------------------------------------- |
| **RH** | Rod-style Temposonics sensor, used inside hydraulic cylinders |
| **M** | Metric stroke |
| **0150M** | Measuring stroke **150 mm** |
| **D70** | Connector / mechanical output style, likely M16 connector option |
| **S2G100 / S2G6100** | Output / wiring / programming code, must verify from nameplate |
| Brand | **MTS Sensors / Temposonics** |
| Type | **Magnetostrictive linear position transducer** |
| -------------------- | ---------------------------------------------------------------- |
| **RH** | Rod-style Temposonics sensor, used inside hydraulic cylinders |
| **M** | Metric stroke |
| **0150M** | Measuring stroke **150 mm** |
| **D70** | Connector / mechanical output style, likely M16 connector option |
| **S2G100 / S2G6100** | Output / wiring / programming code, must verify from nameplate |
| Brand | **MTS Sensors / Temposonics** |
| Type | **Magnetostrictive linear position transducer** |
Manufacturer: Temposonics
- Description
- Specifications
- Non-contact linear position sensor
- Rod type for hydraulic cylinder installation
- Stroke: likely 150 mm
- Operating temperature: about -40 to +75°C
- High vibration resistance: up to 15 g
- High shock resistance: up to 100 g
- Has LED status/diagnostic indication on many versions
- Non-contact linear position sensor
- Rod type for hydraulic cylinder installation
- Stroke: likely 150 mm
- Operating temperature: about -40 to +75°C
- High vibration resistance: up to 15 g
- High shock resistance: up to 100 g
- Has LED status/diagnostic indication on many versions
Related Posts
KL11
Main specs / meaning:
- Type: Differential pressure transmitter
- Brand: Nagano Keiki
- Model: KL11
- Medium: Gas / air
- Sensor: Miniature silicone diaphragm
- Output: Analog signal, depending full model code
- Use: Measures small pressure difference between high side and low side
- Applications: Filter clogging, airflow, clean room pressure, duct pressure, gas pressure monitoring
VEGAVIB 61
- ype: Vibrating rod level switch
- Use: Minimum or maximum level detection in silos / tanks
- Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
- Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
- Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
- Process temperature: typically -50 to +150°C, optional up to +250°C
- Pressure: up to about 16 bar
- Material: usually 316L stainless steel
- Process fitting: thread from G 1½ A or 1½ NPT
- Output options: relay DPDT, transistor NPN/PNP, NAMUR, two-wire options depending exact model code
- Power supply: depends on electronics module; common relay version supports wide AC/DC supply options
WR30-9462
Home / Shop
WR30-9462
JOD JOD35.00
A one-time price of JOD JOD35.00 will be added to your order.
2 Left in Stock
DC - DC CONVERTER
Input: 36–72 VDC
Output: 5-0-5 VDC / dual ±5 V style output
Rated current: 3 A
Input: 36–72 VDC
Output: 5-0-5 VDC / dual ±5 V style output
Rated current: 3 A
Categories: DC Converters
Manufacturer: Computer Product
- Description
- Specifications
- Input: 36–72 VDC
- Output: 5-0-5 VDC / dual ±5 V style output
- Rated current: 3 A
DC - DC CONVERTER
- Input: 36–72 VDC
- Output: 5-0-5 VDC / dual ±5 V style output
- Rated current: 3 A
Related Posts
KL11
Main specs / meaning:
- Type: Differential pressure transmitter
- Brand: Nagano Keiki
- Model: KL11
- Medium: Gas / air
- Sensor: Miniature silicone diaphragm
- Output: Analog signal, depending full model code
- Use: Measures small pressure difference between high side and low side
- Applications: Filter clogging, airflow, clean room pressure, duct pressure, gas pressure monitoring
VEGAVIB 61
- ype: Vibrating rod level switch
- Use: Minimum or maximum level detection in silos / tanks
- Material detected: Bulk solids, granules, powder, pellets, cement, plastic granules
- Measuring principle: Piezo-driven vibrating rod; material dampens vibration and the electronics changes output state
- Medium density: down to about 0.02 g/cm³ / 20 g/L for VEGAVIB 61/62/63 series
- Process temperature: typically -50 to +150°C, optional up to +250°C
- Pressure: up to about 16 bar
- Material: usually 316L stainless steel
- Process fitting: thread from G 1½ A or 1½ NPT
- Output options: relay DPDT, transistor NPN/PNP, NAMUR, two-wire options depending exact model code
- Power supply: depends on electronics module; common relay version supports wide AC/DC supply options